Model Water 仿真水系列水晶膠 X34

Home » Shop » Model Water 仿真水系列水晶膠 X34

Model Water 仿真水系列水晶膠 X34

$135.00

Water 仿真水系列
You can use combinations of types and size throughout your layout for superior realism.

SKU: X34 Category:

Description

Product introduction:
This product is a low-viscosity, high-transparency resin designed for water-like castings. It is used in combination with the accelerator cobalt water, which can make the finished product have a very high transparency like crystal glass. Mainly used for all kinds of sandstone relief, water crafts, replica of transparent hand plate and other molding products.

Features:
High transparency, colorless, medium cooked, fast curing.

How to make a 100ml of crystal model
1. Add 0.3% (3-5 drops) of cobalt water (purple liquid)
**Adding too much cobalt water, the model will be overheated and then its color will be changed when it becomes hardens.
2. Add 0.8% (5-10 drops) of curing agent, which uses to control the gel time, heat release, curing time

Gel time for 30-40 minutes
Full cure time for 20-24 hours

The color of cured product is transparent and its hardness is around D75-80.
Before using in large quantities, please try a small sample first to master its operation skills and avoid losses.

Storage and packaging:
1. Store in a cool and ventilated place. The shelf life of the product is 6 months.
2. Accelerator and curing agent  cannot be mixed with each other. Otherwise, an explosion will occur.
3. In case of contact with skin, rinse thoroughly with soap and water. In case of splashing into eyes, wash with plenty of water and seek medical attention immediately.

Additional information

Size

Go to Top